Table of Contents
Advertisement
2.
Remove the display bezel (5).
NOTE:
In this procedure the display will not be connected to the computer as shown in the following
image.
3.
To remove the webcam/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Lift to disengage the adhesive that secures the webcam/microphone module to the display (1).
c.
Disconnect the cable (2) from the module.
4.
To remove the display panel:
a.
Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the enclosure.
Component replacement procedures
69
Advertisement
Table of Contents
