Table of Contents
Advertisement
Description
Rose gold
Hinges (left and right)
Hinge covers
Left, jet black
Right, jet black
Left, snow white
Right, snow white
Left, pike silver
Right, pike silver
Left, rose gold
Right, rose gold
Left, champagne rose
Right, champagne rose
Left, silk gold
Right, silk gold
Webcam/microphone module
HD
VGA
Touch control board (includes tape and EMI foil)
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
7.
Remove the fan (see
8.
Remove the heat sink (see
To remove the display assembly:
1.
Remove the black Mylar tape from near each hinge (1).
2.
Disconnect the wireless antenna cables from the WLAN module (2).
66
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
32).
Optical drive on page
Bottom cover on page
Fan on page
57).
Heat sink assembly on page
33).
41).
58).
Spare part number
933301-001
926527-001
926533-001
926534-001
926535-001
926536-001
926537-001
926538-001
926542-001
926543-001
926544-001
926545-001
928883-001
928884-001
919471-003
919472-003
926532-001
Advertisement
Table of Contents
