Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 80

1. GENERAL
The aircraft is equipped with a cabin heat system. Hot air for heating the cabin is supplied by a
heat exchanger located around the engine exhaust. There is a small ram air scoop in the
cowling inlet that provides air for the cabin heat system. Hot air enters the cabin through an
opening on floorboard. To select the heater, the control on the upper right part of the instrument
panel must be pulled aft.
2 MAINTENANCE
No major repair or alterations, as outlined in ASTM F2483, FAR 43, or in this manual are
authorized at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
th
1918 South 16 Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com
5.4.12
Page: 2
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
Date: 04/24/2009