Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 323

Return To Service
detect fluid leaks or other discrepancies.
6 Verify all Cub Crafters' Safety Alerts, Service
Bulletins, and Instructions are complied with.
7 Verify the aircraft's documentation is in order:
- Airworthiness Certificate
- Registration
- Pilot's Operating Handbook and Aircraft Flight
Manual
- Weight and Balance
- Equipment List
Operational/Functional Inspection Report
1 Flight Controls:
- Check controls operate in the correct direction
- Ensure movement through full range of travel without
binding and there is no excessive friction.
2 Flaps:
- Lower flaps to the first, second and third notches
- Ensure the notches hold, both upward and downward.
3 Elevator Trim Controls:
- Ensure it operates through full range of travel without
binding.
4 Engine Controls:
- Ensure movement through full range of travel without
binding or cable wear.
5 Altimeter:
- Must indicate within 50 feet of field elevation when set to
correct barometric pressure.
6 Vertical Speed Indicator (VSI):
- Must indicate zero.
7 Battery Master Switch:
- Switch on
- Verify voltage
- Flag on turn coordinator should disappear.
8 Start engine using procedure in Pilot's Operating Handbook,
Section 4.
9 Set 1700 RPM:
- Perform electronic ignition check, should be little or no drop
between left and right systems.
- No engine roughness.
Manual number SSC10000AMM
Date: 01/31/2011
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
X
Initials
Initials
Notes
6.A
Page: A9