Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 322

Landing Gear
4 Shock Absorber and Shock Cords:
- Visual inspection for broken bands, threads,
and weakness.
- If AOSS installed, refer to AOSS information
5 Tires:
- Visual inspection for cuts, uneven or
excessive wear and slippage.
6 Wheels:
- Remove, clean, check, and repack bearings.
7 Main Wheel Tire Pressure:
- Check pressure.
8 Brake Lining and Disks:
- Visual inspection for excessive wear.
9 Brake Lines:
- Visual inspection for chafing and security.
10 Tail Wheel Attachments:
- Visual inspection for tightness and safety.
11 Tail Wheel Fork:
- Visual inspection for looseness on bracket.
12 Tail Wheel Tire:
- Visual inspection for cuts and uneven or
excessive wear.
13 Tail Wheel:
- Remove, clean, and visually inspect for
damage and corrosion
- Functionally check tail wheel swivel lock
- Repack bearings (if applicable).
14 Tail Wheel Tire Pressure (applicable to the
optional tail wheel only):
- Verify pressure.
15 Lubricate per Chapter 6.2
Return To Service
1 Install engine cowling.
2 Install fuselage and empennage access panels.
3 Install wing access panels.
4 Verify oil level is full
5 Perform engine run-up in accordance with
operational / functional check:
- After completing, perform a walk around to
6.A
Page: A8
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Interval
Ref.
100 Special
X
X
X
X
X
X
X
X
X
X
X
X
Interval
Ref.
100 Special
X
X
Manual number SSC10000AMM
Initials
Initials
Date: 01/31/2011