Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 320

25 Transponder (if applicable):
- Visual and functional inspection for condition
and calibration
26 Antennas:
- Visual inspection for condition and security.
27 Brake Cylinders and Parking Valves:
- Operational and visual inspections for leaks
- Fill up with fluid, as required.
28 Fire Extinguisher (if applicable):
- Visual inspection of extinguisher and mounting
bracket
- Visual inspection of safety seal
Fuselage and Empennage
1 Fabric and Finish:
- Visual inspection for cracks and deterioration.
2 Fuel Lines:
- Visual inspection for security and damage.
3 Fuselage Frame Tubing, Longerons, and
Stringers:
- Visual inspection for damage and corrosion.
4 Rudder, Elevator and Stabilizer Trim Cables,
Turnbuckles, Guides, and Pulleys:
- Inspect for tension, safety, wear, damage,
corrosion, and operation.
5 Stabilizer Yoke and Screw:
- Visual inspection for end play, security, and
excessive wear.
6 Rudder, Stabilizer, and Elevator Structures:
- Visual inspection for damage.
7 Rudder Hinge Pins and Bushings:
- Visual inspection for excess wear, and
corrosion.
8 Elevator Hinge Pins and Bushings:
- Visual inspection for excess wear, and
corrosion.
9 Stabilizer Brace Wires:
- Visual inspection for corrosion, tightness, and
safety.
10 Lubricate per Chapter 6.2
6.A
Page: A6
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Cabin
Interval
Ref.
100 Special
24 mos
X
X
X
Interval
Ref.
100 Special
X
X
X
X
X
X
X
X
X
X
Manual number SSC10000AMM
Initials
Initials
Date: 01/31/2011