Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 317

19 Intake Seals:
- Visual inspection for leaks and clamps for
tightness.
20 Flexible Fuel and Primer Lines:
- Visual inspection condition.
21 Throttle, Mixture Controls:
- Visual inspection for proper travel and
operating condition.
22 Exhaust Stacks, Connections, Gaskets, and
Braces:
- Visual inspection
- Replace exhaust gaskets, as required.
23 Muffler, Heat Exchanger, and Hoses:
- Remove shroud
- Visual inspection.
24 Oil Breather Tube:
- Visual inspection for obstructions and security.
25 Crankcase:
- Visual inspection for cracks, leaks, and
security of case bolts.
26 Engine Mounts:
- Visual inspection for cracks and distortion and
security.
27 Engine Baffles:
- Visual inspection for damage and security.
28 Rubber Engine Mount Bushings:
- Visual inspection for deterioration.
29 Firewall and Seals:
- Visual inspection
30 Cabin Heater Control:
- Visual inspection.
31 Alternator:
- Visual inspection for condition, and security
32 Starter:
- Visual inspection for condition and security.
33 Engine Controls:
- Check travel from stop to stop and lubricate.
34 Engine Cowl:
- Install, ensuring good clearance.
Manual number SSC10000AMM
Date: 01/31/2011
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Engine
Interval
Ref.
100 Special
X
X
X
X
50 hours
X
X
X
X
X
X
X
X
X
X
X
Initials
6.A
Page: A3