Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 316

4 Engine Oil:
- Drain.
5 Oil Screen
- Visual inspection for foreign particles.
6 Oil Temperature Sender Unit:
- Check for leaks and security.
7 Oil Lines and Fittings:
- Check for leaks, security, chafing, dents, and
cracks.
8 Oil Cooler:
- Clean and check cooling fins for damage.
9 Engine Oil:
- Fill
10 Spark Plugs
- Visual inspection and re-gap as necessary to
.032-.040"
11 Check Differential Cylinder Compression:
Cylinder 1 ___________
Cylinder 2 ___________
Cylinder 3 ___________
Cylinder 4 ___________
12 Cylinders:
- Visual inspection for cracked or broken fins.
13 Electrical wiring to engine and accessories:
- Visual inspection and replace damaged wires
and clamps.
- Visual inspection of terminals for security and
cleanliness.
14 Ignition Harness and Insulators:
- Visual inspection for high-tension leaks and
continuity.
15 Spark Plug High Tension Leads:
- Replace every 500 hours
16 Induction Air Filter:
- Remove, inspect, and clean.
- Replace at 500 hours, or when filter is more
than 50% covered by foreign material.
17 Carburetor:
- Drain and clean inlet line fuel strainer.
18 Induction Air Box:
- Visual inspection condition.
6.A
Page: A2
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Engine
Interval
Ref.
100
6.3.10 25 hours
6.3.10 25 hours
X
X
X
6.2.3 25 hours
Denso
IK27
X
or
W27ESR-U
X
X
X
X
500 hour
hours, or
X
X
X
Manual number SSC10000AMM
Initials
Special
or 3
years
500
50%
covered
Date: 01/31/2011