3
NON-STRUCTURAL SHEET METAL REPAIRS
3.1
Level of Certification
Non-structural sheet metal repairs are to be accomplished by: a certificated LSA Repairman;
Maintenance Rated and FAA certified LSA Pilot /Owner; or a suitably qualified and experienced
FAA certified A&P Mechanic.
3.2
Authorized Non-Structural Sheet Metal Repairs.
Damage to non-structural sheet metal parts may be repaired using the techniques of FAA
Aircraft Circular 43.13. Chapter 4, Section 4. At this time repairs to primary or secondary
structures by others than Cub Crafters' are not authorized. Description, by Electronic photos or
similar means, of damaged primary or secondary structures, or flight control surfaces structures,
are to be forwarded to Cub Crafters, Inc. accompanied by a suggested repair scheme.
4
NON-STRUCTURAL COMPOSITE MATERIALS REPAIRS
4.1
Level of Certification
Non-structural composite materials repairs are to be accomplished by: a certificated LSA
Repairman; Maintenance Rated and FAA certified LSA Pilot /Owner; or a suitably qualified and
experienced FAA certified A&P Mechanic.
4.2
Authorized Non-Structural Composite Materials Repairs
Damage to non-structural composite materials parts may be repaired using the techniques of
FAA Aircraft Circular 43.13. Chapter 3, Section 1. At this time repairs to primary or secondary
structures by others than Cub Crafters' are not authorized. Description, by photos or similar
means, of damaged primary or secondary structures or flight control surfaces structures are to
be forwarded to Cub Crafters, accompanied by a suggested repair scheme.
6.4
Page: 12
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
Date: 04/18/2013