Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 311

The splice knot is made by crossing the ends of the cord, and making four complete
wraps with the small end of the free piece around the end of the standing piece. The end
is then doubled back through the formed loop. The other free end is wrapped and
doubled back. The long ends of the cords are then pulled until the knot is tight. The short
ends are cut close to the knot. This finishes the splice knot.
Manual number SSC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Figure 6.4.5 - Splice Knot
6.4
Page: 11