Smooth any edges, which may be sticking up, using a small hot iron.
Smooth tape and doubler edges using dry 320 grit sandpaper to remove
surface dust bumps.
Blow and tack off the covering to be sure it is as dust free as possible.
Spray or brush the third coat of Poly-Spray and let dry for approximately 15
minutes.
Spray or brush the fourth coat of Poly-Spray and let dry completely before
sanding.
(l) Paint to match original paint
Manual number SSC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
6.4
Page: 5