Cowl Flaps; Cowl Flap Positioning - Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual

1.2.

COWL FLAPS

(1) COWL FLAP POSITIONING

Position of Cowl Flaps should be determined by the pilot depending on weather
conditions. It is recommended the flaps be in the closed position during the winter months.
They can be adjusted accordingly as conditions dictate.
(a) Remove lower cowl as directed in 1.1 Cowl Removal.
(b) Remove screw (AN526C632R6), washers (AN960-6L), and nut (AN363-632)
from the top and bottom of each cowl flap.
(c) Adjust cowl flap position.
(d) Install screw (AN526C632R6), washers (AN960-6L), and nut (AN363-632) on the
top and bottom of each cowl flap.
(e) Reinstall lower cowl as directed in 1.1 Installation.
6.3.14
Page: 4
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Figure 6.3.14.3: Cowl Flap Adjustment
NOTE:
Manual number SSC10000AMM
Date: 10/28/2010