Removal; Inspection; Installation - Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual

(1) REMOVAL

(a) Remove screws holding the lower access panel to the lower cowl.
(b) Remove lower access panel with air filter.
(c) If a new filter is required, contact Cub Crafters and seek replacement filter part
number PC54108-001.

(1) INSPECTION

(a) Inspect the foam filter for any damage, such as tears or large holes.
(b) Clean the filter in a mild degreasing cleanser to remove dirt and other particles.
Wring the excess from the element and allow it to dry.
(c) Apply a filter oil, such as Castrol Foam Filter Oil or Amsoil High Tack Foam Filter
Oil, to the element and work it into the cells throughout.

(2) INSTALLATION

(a) Align air filter with opening in lower access panel.
(b) Carefully position lower access panel on to lower cowl. Make sure air filter is
inside lower access panel.
(c) Secure lower access panel to lower cowl with screws.
Manual number SSC10000AMM
Date: 10/28/2010
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
6.3.12
Page: 3