Motor Mount Mixture Cable Attachment - Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual

(3) MOTOR MOUNT MIXTURE CABLE ATTACHMENT

Figure 6.3.11.14 - Mounting of the Mixture Cable to Engine Mount
Refer to Figure 6.3.11.14
(a) The mixture cable is fastened to the mixture bracket clamp with a bolt, washers,
and a nut.
(b) The mixture bracket is secured to the engine mount with a bolt, a washer, and a
nut.
The position of the cable housing in the mixture bracket clamp affects the travel
of the knob in relation to the instrument panel. The travel can be adjusted by
loosening the mixture bracket clamp holding the cable housing and sliding the
cable housing in the clamp. Retighten the clamp and check travel.
(c) Be sure the cable housing is held tightly in the clamp after making any
adjustments.
6.3.11
Page: 16
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
Date: 10/28/2010