Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 234

Refer to Figure 6.3.11.9
The throttle plates (4) are kept from moving by seven AN525 screws (3) that are
bolted through the left hand composite side panel (2).
(4) MOTOR MOUNT THROTTLE CABLE ATTACHMENT
1
Figure 6.3.11.10
Refer to Figure 6.3.11.10
The throttle cable (1) is held in place to the Engine Mount bracket (2) with two jam nuts.
The Engine Mount Bracket (2) is held in place on the engine mount tube with a bolt, two
washers and nut.
6.3.11
Page: 12
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
1
3
1 – Throttle Cable
3 – Jam Nut
Attachment of Throttle to Engine Mount Tube Bracket
2
2 – Engine Mount Bracket
Manual number SSC10000AMM
Date: 10/28/2010