Lever Attachment - Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual

(1) LEVER ATTACHMENT

Refer to Figure 6.3.11.1
(a) Each lever is installed onto a bolt that is mounted to the throttle lever plate (2) as
shown.
(b) Each control has spacers (8) which are secured with a AN525 screw (5),
washers (4), a bushing (9), and nylon lock nuts (6).
(c) The connecting rod (3) is secured to the throttle levers with a AN525 screw (5),
washers (4), castle nut, and cotter pin (7).
(d) The throttle cable end is secured to the front throttle lever with a pin vice wire grip
(12), MS35812-1 clevis (13), AN525 screw (5) washers (4), castle nut, and cotter
pin (7).
(2) LEVER INTERCONNECT LINKAGE
1 – Throttle Knob
3 – Throttle Cable
Manual number SSC10000AMM
Date: 10/28/2010
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Figure 6.3.11.2 Throttle Interconnect Linkage
(View from the cockpit, looking outboard)
2 – Connecting Rod
4 – Throttle Lever
6.3.11
Page: 3