(b) Remove the old gasket (1) and make sure the housing and case surfaces are
clean.
(3) INSTALLATION
(c) Assemble the screen (2) in the housing (3), assemble the gasket (1) and the
housing (3) on mounting pad.
(d) Ensure that the gasket is properly oriented.
(e) Using new lock washers (8), secure the housing with 4 bolts (7), torque to 92-100
in/lbs.
(f) Remove the rag and clean all excess oil.
2.3.
OIL COOLER
Manual number SSC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Figure 6.3.11.2: Oil Cooler
6.3.10
Page: 7