2.2.
OIL SCREEN
4
5
1 - Gasket
2 - Pressure Screen
(1) REMOVAL
(a) Drain the oil.
(b) Place a rag below the screen to catch the oil.
(c) Remove the bolts (7) that secure the oil pressure screen housing.
(d) Drain the oil from the housing and remove the screen (2).
(2) INSPECTION
(a) Inspect the screen (2) and inside the housing (3) for foreign particles.
If examination of the screen indicates abnormal metal content, additional service may
be required to determine the source and possible need for corrective maintenance
6.3.10
Page: 6
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
2
3
Oil Temp Probe Inserts Here
3 – Screen Housing
4 - Gasket
Figure 6.3.11.1: Oil Screen
CAUTION
5 - Plug
* Oil Temp Probe (Not Shown)
Manual number SSC10000AMM
1
Date: 04/18/2013