Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 201

(a) Deflate the tire.
(b) Break the tire bead loose from the wheel.
(c) Remove the wheel nuts (6) and washers (5).
(d) Pull the wheel halves (1, 3) apart being careful with the tubes valve stem.
(e) Remove the snap ring (11), grease seals (8, 9) and bearing (2). Repeat on other
wheel half.
1 - Inner Wheel Half
4 - Bolt (3)
7 - Tire
10 - Tube
Manual number SSC10000AMM
Date: 10/28/2010
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
2 - Bearing
5 - Washer (6)
8 - Grease Seal Ring (4)
11 - Snap Ring
Figure 6.3.8.1: Wheel
3 - Outer Wheel Half
6 - Nut (3)
9 - Grease Seal Felt (2)
12 - Brake Disc
6.3.8
Page: 3