Aoss Gear - Optional - Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual

(i)
(j)
(k)
(l)
(m) Service the brakes, if needed, to obtain the proper pedal travel (see
2.3

AOSS GEAR - OPTIONAL

(1) See Manufacturer's Maintenance Manual and other documentation.
Manual number SSC10000AMM
Date: 04/29/2009
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Torque all nuts to 130 in-lbs or if necessary, past this value so that the
nuts may be aligned with the nearest hole on the corresponding bolt.
Safety the nuts with new cotter pins.
Verify that all the hardware is installed properly and lower the aircraft to
the ground.
Reconnect the brake lines and tighten the fittings.
Section 6.3.8).
6.3.7
Page: 9