Horizonal Stabilizers Removal - Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual

Refer to Figure 6.3.5.4
(a) Remove left hand and right hand tail inspection covers.
(b) Remove the cotter pin (4), nut (3), and washer (2) on the top side of the elevator
horns (8 and 9).
(c) Carefully remove the clevis bolt (1) to disconnect the upper elevator cable
connection (10).
(d) Remove the cotter pin (4), nut (3), and washer (2) on the bottom side of the
elevator horns (8 and 9).
(e) Carefully remove the clevis bolt (1) to disconnect the lower elevator cable
connection (10).
(f) Remove the lock nut (7), washers (6), and bolt (5) and carefully separate the
elevators from the stabilizer and fuselage.

(2) HORIZONAL STABILIZERS REMOVAL

Figure 6.3.5.5: Tail Brace Wires and Elevator Attachment
6.3.5
Page: 6
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
Date: 04/18/2013