2.
RUDDER
1 - Springs
(1) REMOVAL
Refer to Figure 6.3.5.1
(a) Unhook the tail wheel steering springs (1) from the rudder arm.
(b) Disconnect the rudder cables (2) from the rudder horn.
(c) Remove the rectangular inspection cover and disconnect the electrical wiring to
the tail assembly (3).
(d) Remove the hinge pins (4) and separate the rudder assembly from the fin.
Manual number SSC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
2 - Cables
3 - Wiring
Figure 6.3.5.1: Rudder Installation
4 - Hinge pins
6.3.5
Page: 3