Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 137

(4) RAISING THE AIRCRAFT FROM THE WING
Use this method for complete removal of landing gear leg.
(a) Place chock under opposite main wheel and tail wheel.
(b) Place jack between the main lift strut wing attachment point and the tie down (Refer
to 6.3.2.3). Jack one side at a time. Jacking both sides simultaneously is to be
avoided.
Manual number SSC10000AMM
Date: 08/31/2011
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Figure 6.3.2.3: Jacking from the Wing
6.3.2
Page: 3