6.3.1 GENERAL
This section describes the removal method and replacement of components for line
maintenance, repairs, and alterations. For maintenance and repair of primary structures, see
Section 5.4.
This section also lists the components that Cub Crafters recommends be replaced at specified
intervals. Whenever this is carried out, ensure that the following information is properly recorded
in the airplane maintenance log:
Date of removal, installation, or overhaul of the component.
Time on the component since last overhaul (if appropriate).
Aircraft's flight hours.
Replacement Times
(1)
ITEM
1
Engine
2
Propeller
3
Alternator
4
Starter
5
Exhaust
System
6
Induction Air
Box
7
Flexible Fuel
Lines
8
Flexible Oil
System
Lines
9
Ignition
Backup
Battery
Manual number SSC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
INTERVAL
REPLACE OVERHAUL
2400 Hours
At engine
overhaul
At engine
overhaul
1000 Hours
2000 hours
X
12 years or
X
engine
overhaul,
whichever
comes first
12 years or
X
engine
overhaul,
whichever
comes first
Annually
X
REF. IN
THIS
MANUAL
X
revision of CC340
See manufacturer's
6.3.16
X
X
X
NOTES
Refer to the latest
Engine manual
maintenance
Manual
6.3.1
Page: 1