Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 126

1. 100 HOUR INSPECTION
Refer to section 5.3.3 of this manual for 100 Hour Inspection requirements
2. CONDITION INSPECTION
Refer to section 5.3.2 of this manual for Condition Inspection requirements
3. SERVICING OF FLUIDS
This information gives the general servicing procedures and maintenance practices that are to
be used when servicing the airplane. For additional detailed information concerning unit
servicing of the various airplane systems and components, refer to the applicable chapters. For
electrical wiring diagrams, refer to the Wiring Diagram Manual.
The intervals specified in Section 6A are considered adequate to meet average requirements
under normal operating conditions. However, it is advisable to shorten the service and
maintenance intervals when operating under abnormal environmental conditions, such as high
humidity and moisture, salt water environments, dusty atmospheric conditions, extreme
temperature ranges, unimproved airport facilities, or other unusual operating requirements. In
salt water areas, special care should be taken to keep the engine, accessories, and airframe
clean to help prevent oxidation.
The operation of the airplane can be seriously impaired if unapproved or
contaminated fuel, oil, fluids, lubricants or materials are used. Adherence to
instructions, cautions, and warnings can avoid injury to personnel and damage to the
Mixing of various brands, types, and weights of materials should be avoided. Specified
lubricants will meet requirements for extreme hot or cold temperature operations. Use of
substitutes or other lubricants may cause a malfunction when operating in extreme temperature
conditions, or may cause excessive wear due to improper lubrication.
6.2
Page: 2
CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
CAUTION
airplane or associated equipment.
Manual number SSC10000AMM
Date: 05/02/2011