Cub Crafters CARBON CUB SS CC11-160 Maintenance Manual page 107

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
The rear seat is made of fabric with inserted composite stringers. The seat is attached in front
by a steel cross bar. The steel cross bar is held in place to the floorboard by two cinched nylon
straps. The top of the rear seat is secured in place by straps integrated into the seat. The
upper straps are wrapped around the fuselage tubes above and incorporate a slide adjuster.
See Figure 3.
Figure 3 - Rear Sling Seat Installed
5.4.15
Manual number SSC10000AMM
Date: 01/31/2011 Page: 3