Ricoh D5530 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Whiteboard
  5. D5530
  6. Operating instructions manual

Ricoh D5530 Operating Instructions Manual

Hide thumbs Also See for D5530:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
For safe and correct use, be sure to read the Safety Information in Read
This First before using the machine.

Advertisement

Table of Contents
loading

Related Manuals for Ricoh D5530

Summary of Contents for Ricoh D5530

  • Page 1 Operating Instructions For safe and correct use, be sure to read the Safety Information in Read This First before using the machine.

  • Page 3: Table Of Contents

    4. The On-Screen Display Menu The On-Screen Display Menu Overview.......................21 Operations in the On-Screen Display Menu....................23 Using the Control Panel Buttons (RICOH Collaboration Board D5530/D5530BK)......23 Using the Control Panel Buttons (RICOH Collaboration Board D6520/D6520BK/D7510/ D7510BK)..............................25 Using the Remote Control..........................26 Picture Menu..............................28...
  • Page 4 Touch Control Setting..........................37 Set Monitor ID..............................38 Motion Detection............................38 Advanced..............................38 Information..............................40 All Reset................................ 40 5. Product Information Specifications..............................41 List of Video Input Signals Supported by the Machine................. 48 List of PAP Input Signal Combination Supported by the Machine............... 50 List of the Functions and Commands Controlled by the RS-232C Terminal..........51 Set and Get Commands Table........................

  • Page 5: Disclaimer

    Disclaimer To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or non-use of this product and operation manuals provided with it. Make sure that you always copy or have backups of the data registered in this machine.

  • Page 7: Using The Remote Control

    1. Using the Remote Control This chapter explains how to use the remote control. Names and Functions of the Remote Control Buttons • Do not put the remote control in the direct heat, humidity, and avoid fire. • Do not drop the remote control, as doing so may cause the remote control to malfunction. •...
  • Page 8 1. Using the Remote Control 3. [EXIT] Returns to the previous menu or closes the On-Screen Display menu when the On-Screen Display menu is on. 4. [ ]/[Volume ]/[ ]/[Volume ] • Scrolls through settings and options in the On-Screen Display menu. •...

  • Page 9: Installing The Batteries Into The Remote Control

    Installing the Batteries into the Remote Control Installing the Batteries into the Remote Control • When batteries fail to function, replace them immediately. • There may be local restrictions on the disposal or recycling of batteries. Consult your local regulations or waste disposal provider. Open the remote control battery cover.
  • Page 10 1. Using the Remote Control Refit the battery cover.

  • Page 11: Removing The Batteries From The Remote Control

    Removing the Batteries from the Remote Control Removing the Batteries from the Remote Control Open the remote control battery cover. Remove the batteries. Refit the battery cover.

  • Page 12: Remote Control Usage Tips

    In this situation, change the light source, readjust the angle of the display or operate the remote control from a location closer to display’s remote control sensor window. RICOH Collaboration Board D5530/D5530BK 30° 30°...
  • Page 13 Remote Control Usage Tips RICOH Collaboration Board D6520/D6520BK/D7510/D7510BK 30° 30° Y310IA0495 1. Max. 7 m (22.9 feet)
  • Page 14 1. Using the Remote Control...

  • Page 15: Connection

    2. Connection This chapter explains how to connect cables. Connecting Audio/Video Signals Pay attention to the following notes when you connect cables: • Please turn off all devices. • Familiarize yourself with the audio/video ports on the machine and the devices you want to use. Be aware that incorrect connections may adversely affect picture quality or result in the picture not being displayed.

  • Page 16: Connecting The Digital Inputs

    2. Connection 2. Audio cable Press the [VGA] button on the remote control. To select an appropriate audio source, see page 30 "Sound Menu" for details. • The audio cable is not supplied and should be purchased separately. Connecting the Digital Inputs Use the supplied HDMI cable to connect the HDMI output jack of a computer or A/V device (such as a VCR or DVD player) to the HDMI Input jack on the machine.

  • Page 17: Connecting Multiple Displays

    Connecting Audio/Video Signals Connect external speakers to the Audio Output jack on the machine. Y310IA0484 • When connecting external speakers, use active speakers. • You can use the remote control or the control panel on the machine to adjust the volume. To adjust the volume, see page 30 "Sound Menu"...
  • Page 18 2. Connection Y310IA0485 1. Additional display 2. DisplayPort cable 3. RS-232C cable 4. The first display (this machine) • The RS-232C cable and DisplayPort cable are not supplied and should be purchased separately. • This RS-232C daisy chain application requires an RS-232C port equipped computer. •...

  • Page 19: Connecting With A Usb Cable

    Connecting Audio/Video Signals Connecting with a USB Cable Connect the machine and an external device with a USB cable to supply power to the device. Y310IA0486 1. USB cable 2. External device (For example: Wireless display adaptor connected with an HDMI cable) •...
  • Page 20 2. Connection...

  • Page 21: Using The Touch Screen

    3. Using the Touch Screen When the USB Type-B For Touch jack of the machine is connected to the USB port of a computer using the supplied USB cable, you can operate the Windows PC or Mac, just as you would with a mouse, using touch operations with your finger.
  • Page 22 3. Using the Touch Screen • To avoid damage to the screen, never use any type of abrasive materials to wipe the screen. • Do not spray a detergent on the screen surface or the body directly. It may result in a short circuit to the touch screen.

  • Page 23: The On-Screen Display Menu

    4. The On-Screen Display Menu This chapter explains how to use the On-Screen Display menu and describes the menu items on it. The On-Screen Display Menu Overview Menu name Options/functions Reference Picture • Low Blue Light See page 28 "Picture Menu". •...
  • Page 24 4. The On-Screen Display Menu Menu name Options/functions Reference Setting • Language See page 36 "Setting Menu". • Power Save • Control Setting • Touch Control Setting • Set Monitor ID • Motion Detection • Advanced • Information • All Reset •...

  • Page 25: Operations In The On-Screen Display Menu

    Operations in the On-Screen Display Menu Operations in the On-Screen Display Menu Using the Control Panel Buttons (RICOH Collaboration Board D5530/ D5530BK) Press [Menu] to open the On-Screen Display menu. Y310IA0487 Press [ ] or [ ] to select an item.
  • Page 26 4. The On-Screen Display Menu Press [ ] or [ ] to select a feature and press [ ] or [ ] to adjust settings. Y310IA0490 Press [Enter/Input] to save changes. Y310IA0489 Press [Menu] to return to the previous item. Press [Menu] several times to return to the top screen of the On-Screen Display menu, and press [Menu] again to close the On-Screen Display menu.

  • Page 27: Using The Control Panel Buttons (Ricoh Collaboration Board D6520/D6520Bk/D7510/ D7510Bk)

    Operations in the On-Screen Display Menu Using the Control Panel Buttons (RICOH Collaboration Board D6520/ D6520BK/D7510/D7510BK) Press [Menu] to open the On-Screen Display menu. Y310IA0491 Press [ ] or [ ] to select an item. Y310IA0492 Press [Enter/Input] to confirm selections.

  • Page 28: Using The Remote Control

    4. The On-Screen Display Menu Using the Remote Control Press [MENU] to open the On-Screen Display menu. DTW210 Press [ ] or [ ] to select an item. DTW211 Press [ENTER] to confirm selections. DTW212...
  • Page 29 Operations in the On-Screen Display Menu Press [ ] or [ ] to select a feature and press [ ] or [ ] to adjust settings. DTW213 Press [ENTER] to save changes. DTW212 Press [MENU] to close the On-Screen Display menu. DTW214...

  • Page 30: Picture Menu

    4. The On-Screen Display Menu Picture Menu Low Blue Light Turns on or off the Low Blue Light function. • On Enables Low Blue Light. • Off Disables Low Blue Light. Picture Mode Sets the display mode. • Standard This is the standard setting. •...
  • Page 31 Picture Menu Contrast Adjusts the image contrast. Brightness Adjusts the image brightness. Saturation Adjusts the color intensity of the image. Sharpness Adjusts the image sharpness. Color Temp. Adjusts the color temperature. • 9300K Displays images in a bluish tone. • 8000K Displays images in a natural tone.

  • Page 32: Sound Menu

    4. The On-Screen Display Menu Sound Menu Sound Mode Adjusts the sound output from the speakers. • Dynamic: Enhances treble and bass. • Standard: Flat settings. • Custom: Enables editing of the Treble and Bass settings. Treble Adjusts the audio treble. Bass Adjusts the audio bass.
  • Page 33 Sound Menu • Auto: Automatically selects the external speaker as the audio output source when the external speaker is connected to the machine. Automatically selects the internal speaker as the audio output source when the external speaker is not connected to the machine. •...

  • Page 34: Screen Menu

    4. The On-Screen Display Menu Screen Menu PAP Setting (Picture and Picture) Enables or disables the PAP function and turns on or off the PIP (Picture in Picture) and PBP (Picture by Picture) functions. If the Touch Feature function is set to [On], PBP will be disabled. PAP Sub source •...

  • Page 35: Aspect

    Screen Menu Picture Position Only in PIP mode, changes the position of the sub picture. Upper Left Upper Right Lower Left Lower Right See page 50 "List of PAP Input Signal Combination Supported by the Machine" for more information on supported combinations. When a controller designed compliant with OPS (Open Pluggable Specification) standard is connected to the machine, the PBP mode will be disabled.

  • Page 36: Adjust Screen

    4. The On-Screen Display Menu For video signal inputs 4:3 original source 16:9 original source Normal Normal Full Full For PC signal input Full Real Adjust Screen Auto Adjustment Automatically optimizes image display for the VGA input. Phase Adjusts the phase of the VGA input image. Clock Frequency Adjusts the clock frequency of the VGA input image.

  • Page 37: Touch Feature

    Screen Menu H. Position Adjusts the horizontal position of the VGA input image. V. Position Adjusts the vertical position of the VGA input image. Touch Feature When turned [On], Aspect, PBP, and Overscan will be disabled to optimize touch performance. For details about Overscan, see page 38 "Advanced".

  • Page 38: Setting Menu

    4. The On-Screen Display Menu Setting Menu Language Sets your preferred language for the On-Screen Display menu. Power Save The machine can be set to enter power saving mode when no signal is detected. The following settings are available for power saving mode: •...

  • Page 39: Control Setting

    Setting Menu Control Setting • Set this item to [RS-232C] when an RS-232C terminal is connected to the display; set it to [Computer In] when a controller that supports OPS (Open Pluggable Specification) is connected to the display. RS-232C Sets RS-232C terminal to control the machine. Computer In Sets the OPS (Open Pluggable Specification) controller to control the machine.

  • Page 40: Set Monitor Id

    4. The On-Screen Display Menu When [Auto] is set and the video input source is switched, the device connected to the USB hub of the machine may not be recognized. In that case, connect the USB device again, pair the Bluetooth devices again, or turn the machine on and off.
  • Page 41 If this setting is set to [Off], the power indicator will remain off even if the machine is turned on. OSD Rotation (RICOH Collaboration Board D5530/D5530BK only) To set the display horizontally (Landscape) or vertically (Portrait) according to the installation of the main unit.

  • Page 42: Information

    4. The On-Screen Display Menu Information Displays the following information of your machine: • Model Name • Operation Time • Software Version All Reset Returns all settings to factory default values.

  • Page 43: Product Information

    5. Product Information This chapter explains the machine specifications and input and output signals the machine supports. Specifications Item Specifications LCD panel Backlight Panel size RICOH Collaboration Board D5530/ D5530BK 55” RICOH Collaboration Board D6520/ D6520BK 65” RICOH Collaboration Board D7510/ D7510BK 75”...
  • Page 44 Item Specifications LCD panel Native resolution (pixels) 3840 × 2160 Effective display area (H × V) RICOH Collaboration Board D5530/ D5530BK 1209.6 × 680.4 mm (47.6 × 26.8 inches) RICOH Collaboration Board D6520/ D6520BK 1428.48 × 803.52 mm (56.2 × 31.6...
  • Page 45 Specifications Item Specifications Touch Technology InGlass Resolution 19353 ×10886 Maximum number of touches Touch output USB 3.0 Supported operating systems Multi-point touch: Windows 8.1, Windows 8.1 Pro, Windows 8.1 Enterprise Windows Embedded Standard 7 Windows Embedded Standard 8 Windows 10 (Home/Pro/Enterprise/ IoT) Single-point touch: Windows 8.1, Windows 8.1 Pro,...
  • Page 46 • North America 120V AC, 60 Hz • Europe 220-240V AC, 50 Hz • Asia 220-240V AC, 50/60 Hz Consumption (While RICOH Collaboration Board D5530/ operating) D5530BK 350 W RICOH Collaboration Board D6520/ D6520BK 380 W RICOH Collaboration Board D7510/...
  • Page 47 Dimensions (W × H × D) • When installed horizontally: 1290 × 773 Collaboration × 78 mm (50.8 × 30.4 × 3.1 inches) Board D5530/ • When installed vertically: 773 × 1290 × D5530BK 78 mm (30.4 × 50.8 × 3.1 inches)
  • Page 48 Touch Control Setting on the Setting menu. For details, see page 36 "Setting Menu". *3 The display is equipped with a motion detection sensor on its front. RICOH Collaboration Board D5530/D5530BK Y310IA0497 1. Maximum approx. 5 m (16.4 feet)
  • Page 49 Specifications 2. Approx. 55°(in horizontal direction), approx. 30°(in vertical direction) RICOH Collaboration Board D6520/D6520BK/D7510/D7510BK Y310IA0496 1. Maximum approx. 5 m (16.4 feet) 2. Approx. 55°(in horizontal direction), approx. 30°(in vertical direction) • Specifications and functions are subject to change without notice.

  • Page 50: List Of Video Input Signals Supported By The Machine

    5. Product Information List of Video Input Signals Supported by the Machine Input source Resolution DisplayPort HDMI 640 × 480 @ 60Hz (VGA) Supported Supported Supported 640 × 480 @ 72Hz Supported Supported Supported 640 × 480 @ 75Hz Supported Supported Supported 720 ×...
  • Page 51 List of Video Input Signals Supported by the Machine Input source Resolution DisplayPort HDMI 720 × 576p (50Hz) Not supported Supported Supported 1280 × 720p (25Hz) Not supported Not supported Not supported 1280 × 720p (30Hz) Not supported Not supported Not supported 1280 ×...

  • Page 52: List Of Pap Input Signal Combination Supported By The Machine

    5. Product Information List of PAP Input Signal Combination Supported by the Machine Main/Left picture signal source Computer In HDMI DisplayPort Supported Supported Supported Supported HDMI Supported Supported Supported Supported Sub/Right picture signal DisplayPort Supported Supported Supported Supported source Computer In Supported Supported Supported...

  • Page 53: List Of The Functions And Commands Controlled By The Rs-232C Terminal

    List of the Functions and Commands Controlled by the RS-232C Terminal List of the Functions and Commands Controlled by the RS-232C Terminal When you connect the machine and a computer with the communication cable RS-232C (crossover cable), you can control the machine from the computer via the RS-232C terminal using a terminal emulation program.
  • Page 54 5. Product Information 1 Pin Grid Array and Names of Signals Pin No. Signal Remark D-Sub 9 Pin (Male) (Outside View) Input to the machine (LCD monitor) Output from the machine (LCD monitor) frame * Using a null modem cable (crossover cable) is required to use the machine with a computer.

  • Page 55: Set And Get Commands Table

    List of the Functions and Commands Controlled by the RS-232C Terminal Set and Get Commands Table Set and Get Commands Table In the table below, hyphens "-" indicate items that are not supported. Set Command Get Command Value Range Function Length Remark Command...
  • Page 56 5. Product Information Set Command Get Command Value Range Function Length Remark Command Command (ASCII Bytes) Command Command Code Code Type Type (Hex) (Hex) PAP Swap Swap main and sub sources. Whatever value can be specified. PAP Size 00000: Small When PAP = PIP 10000: Large PIP Position...

  • Page 57: Output Signals

    Output Signals Output Signals The DisplayPort Output jack of the machine outputs the signals from the DisplayPort Input jack as they are. You can connect devices, and view the video or image displayed on the machine on the connected device. •...
  • Page 58 5. Product Information...

  • Page 59: Troubleshooting

    6. Troubleshooting This chapter explains possible problems and solutions when the functions of this machine cannot be properly used. Troubleshooting Problem Solution No picture Check the following: • Is the machine turned on? Check the power indicator of the display. •...
  • Page 60 6. Troubleshooting Problem Solution Uneven screen color/brightness If the screen is viewed from a certain angle, there may be uneven colors or brightness due to the LED structure of the LCD panel. This is a technical limitation of the LCD technology and is not a defect.
  • Page 61 Troubleshooting Problem Solution The control panel buttons do not work When a controller designed compliant with OPS (Open Pluggable Specification) standard is connected to the machine, the control panel buttons will not work until the controller is completely shut down. Wait until shutdown is complete.
  • Page 62 6. Troubleshooting...

  • Page 63: Appendix

    7. Appendix This chapter describes the trademarks. Trademarks DisplayPort is registered trademarks of Video Electronics Standards Association in the U.S. and/or other jurisdictions. VGA is a trademark of International Business Machines Corporation in the United States, other countries, or both. HDMI and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
  • Page 64 MEMO...
  • Page 65 MEMO...
  • Page 66 MEMO Y310-7506B...
  • Page 68 EN GB EN US EN AU Y310-7506B © 2020, 2021 Ricoh Co., Ltd.

This manual is also suitable for:

D7510D6520D5530bkD6520bkD7510bk

Table of Contents