Caution And Warning - Health O Meter 349KLXAD User Instructions

CAUTION AND WARNING

To prevent patient/caregiver injury or damage to your scale, please follow the
instructions in this user manual very carefully.
Do not exceed the weight capacity specified for this scale.
•
For accurate weighing, this scale must be placed on a flat, stable surface.
•
For accurate weighing, verify before each use the proper operation according to the
•
procedure described in this manual.
Do not use in the presence of flammable or explosive materials.
•
If the scale becomes damaged, it should not be operated until properly serviced.
•
Do not transport the scale with a patient or object on the scale.
•
Ensure that the AC adapter and scale do not come in contact with liquids, excessive
•
temperature, or excessive humidity.
Patient/caregiver safety
Patient should wear socks or other form of lightweight foot covering during weighing
•
event.
To prevent patient injury, the patient must be attended throughout the entire weighing
•
event. Caregivers should ensure that the patient is stable and provide support as
needed when getting onto and off of the scale.
When operating the scale with the optional AC adapter:
Operate this scale exclusively with the AC adapter provided by Health o meter
•
Professional. Use of an unspecified adapter will void the warranty and can pose a
serious safety hazard.
For use with AC adapter model ADPT40
•
Prior to using this scale, inspect the AC adapter cord for cracking / fraying, or for
•
broken / bent plug prongs.
Prior to using this scale, ensure that the AC adapter is plugged into an outlet with the
•
rated voltage appropriate for operation.
Ensure that the AC adapter outlet is wired to a circuit breaker or other protected power
•
source.
Unplug the AC adapter, and carefully store both the adapter and adapter cord before
•
moving the scale.
Operating this scale at voltages and frequencies other than specified can damage the
•
equipment and will void the warranty.
When operating the scale with batteries:
For accurate weighing, if the "LO" indicator activates, replace the batteries or switch to
•
the AC adapter as soon as possible.
When replacing / inserting batteries, be sure to use all new batteries.
•
In no event shall Pelstar, LLC be liable for damages or injuries whatsoever arising out of or
connected with the assembly, use, or misuse of its products.
3