Malfunctions; Status Displays; Troubleshooting - Record C 127 SU OFFSET User Manual

7

Malfunctions

7.1

Status displays

Malfunctions are shown on the LCD display. If there is a malfunction, the display changes between
light and dark, as shown in the following figure. Multiple malfunctions can be displayed, e.g. 1 / 2. If
there are multiple malfunctions, they are numbered as follows.
Step Button
1.
E
Malfunction display for primary / secondary operator
It is possible to switch between the malfunction display of the primary / secondary operator
The main view is returned to by scrolling through the malfunction displays.
Step Button
1.
E
7.2

Troubleshooting

The following malfunctions on the door can only be rectified if an electronic control panel with display
is present.
Malfunction
Display shows a malfunction mes-
sage.
Door does not work.
BAL_C127-SU_OFFSET_EN_1V0_REC_121-006454770
3
AKI > active
Operation
Press button 1 x
Operation
Press button 1 x
Cause
Malfunction present
No power connected.
Incorrect operation mode se-
lected.
Status LED flashing
Malfunction message on the
display of the
Defective
3
AKI > active
Function
Return to the main
menu for 4 seconds
Function
Scroll through the
malfunction displays
Measure
Restart controller and/or
control panel.
Check power connection
Check operation mode.
Restart controller and/or
control panel.
Restart controller and/or
control panel.
Close the door manually
and notify a service engin-
eer.
7
Malfunctions
Display on LCD
Automatic
Display on LCD
38 master 1/2
2/2
Temp. motor 1
AKI > active
Personnel
System operator
System operator
System operator
System operator
System operator
System operator
29 / 32
AKI > active