Table of Contents
Advertisement
6
Servicing and maintenance
6.3.5
Extent of the inspection
The test is carried out according to the manufacturer's test instructions. The result of the test is recor-
ded in a test protocol and recorded in the test logbook.
The inspection usually takes place at the same time as the maintenance of the system.
The inspection also checks whether no changes have been made to the system since the last inspec-
tion and whether it meets the current safety requirements.
6.3.6
Requirements for documentation
Extent, results and dates of the periodic inspections, must be documented and kept by the operator in
an Inspection- and Maintenance log book.
The contractor / operator must be informed of the results in writing.
The contractor / operator requires the inspection report (check list) for proof that the periodic inspec-
tion was performed and/or as documentation for construction authorities or accident and liability insur-
ances, etc.
28 / 32
BAL_C127-SU_OFFSET_EN_1V0_REC_121-006454770
Advertisement
Table of Contents
