3.
Lift the speakers out of the computer (3).
Reverse this procedure to install the speakers.
Power connector
To remove the power connector, use this procedure and illustration.
Table 5-9
Power connector description and part number
Description
Power connector
Before removing the power connector, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the rubber feet (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
5.
Remove the right hinge screw and lift the right hinge (see
Remove the power connector:
1.
Disconnect the power connector cable (1) from the system board.
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page
35).
32).
33).
Display assembly on page
Spare part number
L23188-001
32).
51).