Table of Contents
Advertisement
Before removing the bottom cover, prepare the computer for disassembly (see
page
32).
Remove the computer feet:
1.
Close the computer and position it upside down, with the front toward you.
2.
Insert a tool with no sharp edges between the base enclosure and one end of the rubber feet.
3.
Pull up the rubber feet lightly and quickly.
To install the rubber feet, refit them on the adhesive backing.
NOTE:
The bottoms of the computer feet are ribbed. These ribs are designed to fit only one way in the
grooves that are in the enclosure. Make sure the feet are positioned in those grooves when reinstalling the
feet.
Bottom cover
To remove the bottom cover, use this procedure and illustration.
Table 5-2
Bottom cover descriptions and part numbers
Description
Bottom cover, dark ash silver
Bottom cover, asteroid silver
Before removing the bottom cover, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page
Preparation for disassembly on
Spare part number
M75144-001
M75145-001
32).
Bottom cover
33
Advertisement
Table of Contents
