OVERVIEW The Drive FLSCALE weight scale assembly is ONLY designed for use with the DRIVE Levantar (FLNP500, FLP500) and Gravis Floor Lifts (FLNP600, FLP600). Do not attempt to retro fit the scale to other floor lifts.
Warning: the load cell contains no user serviceable components and should be service by qualified personnel only. Any unauthorized tamper- ing will void the warranty. COMPONENTS Make sure that the following components are included with the DRIVE FLSCALE weight scale assembly: • DRIVE FLSCALE load cell scale •Washer x2 •...
Page 5
DRIVE #FLSCALE SCALE INSTALLATION Bolt and nut provided with lift Pin and key ring provided with scale...
SCALE SETTING Power ON/OFF Power ON: Press for I second. Scale will boot up, run battery test and initialize. Screen shows detection message while scale detects load and auto-zeros. Power OFF: Press for 1 second to power off scale. Display shows power-off message. Hold Display Press to lock the display.
SCALE SETTING (CONTINUED) Backlight Press simultaneously for 1 second to enter setting mode. Press to enter backlight option and press to change backlight option. Backlight can be set to permanently off. Permanently on, or 5, 15, 20, 30 and 60 sec. When backlight is set to 5, 15, 30 or 60 seconds, then scale turns off backlight in corresponding seconds after if is stable.
WARRANTY This warranty does not affect or in any way limit your statutory rights. Drive DeVilbiss guarantee this FLSCALE floor scale for 1 year from date of installation or 18 months from date of manufacturing, whichever is shorter, by virtue of defects in material or workmanship.