Download Print this page
Elkay 570A-1 Instruction Manual

Elkay 570A-1 Instruction Manual

Outdoor illuminated pir timer

Advertisement

Quick Links

Instruction Guide
OUTDOOR
ILLUMINATED
PIR TIMER
570A-1
3 wire
The Outdoor Illuminated PIR Timer
(3 wire) is part of the Elkay family of
switches, timers and detectors
which save energy and increase
convenience in and around your
home, garden or premises.
Rating at 240V ac
All load types 16A
Time Delay: 2 min - 2 hrs
Lux Level setting
Blue Locator ring
Last minute indicator
IP66
Usage
The outdoor PIR timer has been designed
tocontrol lighting, heating and ventilation.
The unit is switched on by the detection
of moving body heat within a specifi ed
range. When body heat is no longer
detected, the unit will switch off after
the adjustable time period has elapsed.
If moving body heat is detected again
during the timing period, the timing
sequence will restart. The unit has a lux
level adjustment, which measures the
ambient light levels and prevents
lighting being switched on when there
is suffi cient light in the room.
Your Elkay PIR timer has the added benefi t
of a manual override facility. This allows
the lights to be turned on for the set
period of time when the ambient light
level is such that the lights would not
usually come on. In dark conditions the
manual override disables the PIR
allowing the lights to be turned off
indefi nitely or when the override switch
is re-pressed.
BDH
BROOK DESIGN
HARDWARE LTD

Advertisement

loading

Summary of Contents for Elkay 570A-1

  • Page 1 ILLUMINATED PIR TIMER 570A-1 3 wire The Outdoor Illuminated PIR Timer (3 wire) is part of the Elkay family of switches, timers and detectors which save energy and increase convenience in and around your home, garden or premises. Rating at 240V ac •...
  • Page 2 Turn off mains supply for avoid subjecting the sensor to direct sunlight. Ensure that the sensor installation. Your Elkay unit is compatible with a single gang, 25mm deep, British is not adjacent to the load. Do not site the Standard accessory plate.
  • Page 3 INSTRUCTION GUIDE OUTDOOR ILLUMINATED PIR TIMER – 3 WIRE Step 1 Outdoor Installation Place the Live In wire into the left hand Outdoor Unit can only be used in conjunction position of the connector, the switched with the surface mount box supplied. Live Out wire into the second from Take the surface mount box and remove left position of the connector and neutral...
  • Page 4 For further help or assistance or information on this or other products in the range person or a qualifi ed electrician and should be please call the Elkay Technical team on +44 (0)28 9061 6505. Please call the fi tted to current IEE wiring regulations BS 7671.