Table of Contents
Advertisement
Step 3
To lower the load on the lift, turn the knob release handle (hand wheel) until the platform is lowered to
the desired height.
Maintain the lift by adopting a program of conscientious repair and maintenance in accordance with
the following recommended
examined before it is used. Keep your tool in good repair.
1. Regularly check the condition of the lift, particularly the casters and joints.
2. Tighten any loose fasteners.
3. Replace damaged parts only with spare parts recommended by the manufacturer.
4. Store the lift only inside of buildings, in order to avoid rust or damage caused by chemicals or
rainwater.
5. If necessary, lubricate the caster bearings.
6. Make sure to conserve the nameplate with warning hints on the lift.
Maintenance
procedures.
It is recommended that the general condition of any tool be
Page 7 of 12
Advertisement
Table of Contents
