Magis Pro V2 Indoor Unit installation operations in Domus
Container.
To install this version you need the Magis Pro V2 accessory kit
for pairing.
Then proceed as follows:
• Screw the bracket (e) to the appropriate upper crosspiece inside
the Domus container with the screws (f).
• Hang the Indoor unit (P) on the previously installed bracket
(e) (Fig. 29).
f
P
86
e
1
2
• Remove the grill from the Magis Pro V2 Indoor Unit.
N.B.: The Magis Pro V2 Indoor Unit is supplied with an
interception cock to be placed on the system flow.
• Remove the by-pass pipe between the storage tank unit flow and
return (MU-RU) from the indoor unit.
Attention: in this installation it is essential to leave the cap on
the storage tank unit return fitting of the indoor unit mounted.
1
f
2
29
P