Immergas BASIC MAGIS PRO Instructions And Warnings page 84

Insert the storage tank unit (a) inside the Domus Container with
the flange positioned on the right side and at the bottom, as shown
in Fig. 27.
Hang the hydronic unit (c) on the central bracket on the Domus
Container. Secure the positioning of the hydronic unit by tighte-
ning the screws (d6) on the central bracket (Fig. 27).
D
6
E
84
a
8
7
N.B.: if the installer deems it necessary, it is possible to further
block the positioning of the hydronic unit by screwing the self-
drilling screws (d7) through the holes provided on the lower part
of the hydronic unit.
Fasten the brackets (e) to the right and left tubes of the Domus
Container using the appropriate screws (Fig. 27).
C
5
10
10
d6
11
d7
d7
27
12
e
9
c
11