Magis Combo Plus V2 Indoor Unit installation operations in
Solar Container.
To install this version, the Magis Combo plus V2 accessory kit
is required.
Discard the indicated components (Ref. Y Fig. 18) from the "Basic
Magis Pro accessory unit" and use those in the optional additional
Kit and supplied in the connection unit of the Magis Combo Plus
V2 Indoor Unit (Ref. W Fig. 18).
Basic Magis Pro for coupling to Magis Combo Plus.
Y
76
Then proceed as follows:
• Tighten the bracket (e) to the special upper cross member with
screws (f).
• Hang the indoor unit (G) on the bracket (e) installed previously,
(Fig. 17).
• Remove the by-pass pipe between the storage tank unit flow and
return (MU-RU) from the indoor unit.
e
1
f
2
G
1
f
2
W
17
G
18