Immergas BASIC MAGIS PRO Instructions And Warnings page 75

Single-temperature single-zone hydronic unit with 160-litre storage tank unit

Hide thumbs Also See for BASIC MAGIS PRO:

Table of Contents

Available languages

Using the pipes inside the accessories box, make the remaining

hydraulic connections between the Storage Tank Unit (a), the

Single-zone hydraulic unit (c) and the Magis Pro V2 Indoor Unit

(P), as shown in Fig. 16.

For easier assembly, start with the pipes closest to the rear wall

up to those closest to the installer, remembering to interpose the

appropriate gaskets supplied.

The sanitary probe (Fig. 16) must be inserted in the appropriate

seat "1" (Ref. 17 Fig. 47) when the sanitary electrical resistance

is not present.

Otherwise it must be inserted in seat "2" (Ref. 10 Fig. 47).

At the end of the installation, insulate all the connections with the

material present inside the accessories box.

Table of Contents