Immergas BASIC MAGIS PRO Instructions And Warnings page 71

• Bend the strip (d2) around the storage tank unit (a) and fasten
it with the screw (D) (Fig. 11).
• Hang the hydraulic unit (c) on the central bracket of
the Solar Container. Secure the position of the hydraulic
unit by fastening the screws (d6) on the central bracket
(Fig. 12 ).
N.B.: in the event that the installer thinks it is necessary, it is
d2
10
a
13
13
d6
14
d7
d7
11
d4
possible to secure the position of the hydraulic unit even further
by using self-tapping screws (d7), inserting them into the holes
on the lower part of the hydraulic unit itself.
Attention: the fixing screws (d6 and d7) are found in the acces-
sories kit for coupling to Magis Pro V2.
12
c
14
11
12
71