Immergas BASIC MAGIS PRO Instructions And Warnings page 62

1
INSTALLATION
BASIC MAGIS PRO.
1.1 DESCRIPTION OF THE DEVICE.
The Basic Magis Pro described below allows you to install a hy-
draulic unit designed to be coupled with different energy sources
(heat pumps and hybrid heat pumps, excluded from this supply)
in special frames (recessed, called "Solar Container" and "Solar
Container Combo" or outside the wall, defined as "Domus Con-
tainer", both not included in this supply), which are able to meet
the winter central heating, summer cooling needs (excluding
Victrix Hybrid Plus), as well as the production of domestic hot
water, possibly with solar integration (via a special optional kit).
1.2 INSTALLATION RECOMMENDATIONS.
The Basic Magis Pro was designed to be installed inside the walls
using the specific "Solar Container" and "Solar Container Combo"
recessed frames, or outside the wall using the "Domus Container"
frame, securing it with the brackets supplied together with the
product itself. It was not designed to be installed on plinths or
floors and without the specific recessed frame.
The place of installation of the Basic Magis Pro and relative
Immergas accessories must have suitable features (technical
and structural), such as to allow for (always in safe, efficient and
comfortable conditions):
- installation (according to the provisions of technical legislation
and technical regulations);
- maintenance operations (including scheduled, periodic, routine
and special maintenance);
- removal (outdoors in the place for loading and transporting the
appliances and components) as well as their eventual replacement
with appliances and/or equivalent components.
Only a professionally qualified heating/plumbing technician is
authorised to install the Basic Magis Pro.
Installation must be carried out according to regulation standards,
current legislation and in compliance with local technical regula-
tions and the required technical procedures. Before installing the
1.3 PACKAGING
62
product, ensure that it is delivered in perfect condition; if in doubt,
contact the supplier immediately. Packing materials (staples, nails,
plastic bags, polystyrene foam, etc.) constitute a hazard and must
be kept out of the reach of children. Keep all flammable objects
away from the appliance (paper, rags, plastic, polystyrene, etc.). In
the event of malfunctions, faults or incorrect operation, turn the
device off immediately and contact an authorised company (e.g.
the Immergas Technical Assistance Centre, which has specifically
trained staff and original spare parts). Do not attempt to modify
or repair the appliance alone. Failure to comply with the above
implies personal responsibility and invalidates the warranty.
A t t e n t i o n : t h e i n s t a l l a t i o n o f t h e " S o l a r
Container" and "Solar Container Combo" inside the wall or the
"Domus Container" must guarantee a stable and effective support
for the pack. The Basic Magis Pro ensures appropriate support
only if installed correctly (according to the rules of good practice),
following the instructions on its instructions leaflet. The "Solar
Container" and "Solar Container Combo" are not supporting
structures and must not replace the removed wall; it is therefore
important to verify its position in the wall. For safety reasons
against any leaks it is necessary to plaster the pack housing in
the brick wall.
This product together with a heat generator is used to heat water
to below boiling temperature in atmospheric pressure.
It must be connected to a central heating system and domestic
hot water circuit suited to its performance.
"Anti-legionella" heat treatment of the Immergas storage
tank unit (activated by the specific function present on the
predisposed thermoregulation systems): during this stage, the
temperature of the water inside the storage tank exceeds 60°C with
a relative risk of burns. Keep this domestic hot water treatment
under control (and inform the users) to prevent unforeseeable
damage to people, animals, things. The Magis Pro V2 requires the
optional 1.5 kW integrative resistance to be installed.
1