Immergas BASIC MAGIS PRO Instructions And Warnings page 60

Congratulations for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas Customer, you can also
count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your product. Read the following pages carefully: you will be able to draw
useful tips on the proper use of the device, compliance with which will confirm your satisfaction with the Immergas product.
For assistance and routine maintenance, contact Authorised Service Centres: they have original spare parts and are specifically trained directly by the manufacturer.
All Immergas products are protected with suitable transport packaging.
The material must be stored in a dry place protected from the weather.
The instruction booklet is an integral and essential part of the product and must be given to the new user in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.
This instruction manual provides technical information for installing the Immergas pack. As for the other issues related to pack installation (e.g. safety in the work site,
environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in force and good practice rules.
In compliance with legislation in force, the systems must be designed by qualified professionals, within the dimensional limits established by the Law. Installation and
maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and by professionally qualified staff, intended as
staff with specific technical skills in the system sector, as envisioned by the Law.
Improper installation or assembly of the Immergas appliance and/or components, accessories, kits and devices can cause unexpected problems for people, animals and objects.
Read the instructions provided with the product carefully to ensure proper installation.
Maintenance must be carried out by skilled technical staff. The Immergas Authorised After-sales Service represents a guarantee of qualifications and professionalism.
The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially dangerous.
If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, standards or instructions contained in this booklet (or however
supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damage and the appliance warranty is invalidated.
For further information regarding legislative and statutory provisions relative to the installation of gas heat generators, consult the Immergas site at the following address:
www.immergas.com
The Basic Magis Pro pack consists of separate units, some of which are excluded from this supply to allow the correct combination of
features. Below are the possible combinations through which the system is able to meet the winter central heating, summer cooling
requirements, as well as the production of domestic hot water:
Standard
supply
Magis Pro 4 - 6 - 9 V2
Solar Container or Domus Contain-
Excluded
from
DHW (Domestic hot water) 1.5 kW
this supply
System 3.0 kW resistance kit
Solar heating coupling kit
Inertial storage tank kit*
(*) check which Inertial storage tank kit to install according to the type of product.
The company IMMERGAS S.p.A., with registered office in via Cisa Ligure 95 42041 Brescello (RE), declares that the design, manu-
facturing and after-sales assistance processes comply with the requirements of standard UNI EN ISO 9001:2015.
For further details on the product CE marking, request a copy of the Declaration of Conformity from the manufacturer, specifying the
appliance model and the language of the country.
The manufacturer declines all liability due to printing or transcription errors, reserving the right to make any modifications to its
technical and commercial documents without forewarning.
Accessories kit for coupling to Magis Pro V2
er
-
resistance kit
Dear Customer,
General warnings
Basic Magis Pro
Single-zone Hydaulic unit
160-litre storage tank unit
Magis Combo Plus 4 - 6 - 9 V2
Solar Container Combo
Accessories kit for coupling to Magis
Combo Plus V2
Solar heating coupling kit
Inertial storage tank kit*
Victrix Hybrid Plus
Solar Container or Domus Container
Accessories kit for coupling to Victrix
Hybrid Plus
Solar heating coupling kit
Inertial storage tank kit*