4400-lb. capacity extra-long pallet jack (12 pages)
Summary of Contents for Strongway 46202
Page 1
AIR BUMPER JACK OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 46202...
For technical questions please call 1-800-222-5381. INTENDED USE The adjustable 2,500 lb. Strongway Air Bumper Jack features a 3-way heavy-duty brass air valve to provide fine control when lifting and lowering a vehicle. A safety latch design with 6 different automatic positions prevents unintentional lowering of the load.
IMPORTANT SAFETY CONSIDERATIONS JACK USE AND CARE Do not modify the Jack in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the Jack was designed. ...
SAFETY MARKINGS WARNING: Study, understand, and follow all instructions before operating this device. Do not exceed rated capacity. Use only on hard, level surfaces. Load saddles equally. Lifting device only. Immediately after lifting, support the vehicle with appropriate means. Only attachments and/or adapters supplied by the manufacturer shall be used. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
Page 5
* Position the Jack Position the jack to only lift on the areas of the vehicle as specified by the vehicle manufacturer. * Always Use Jack Stands After lifting the vehicle always support the load with appropriately rated vehicle Jacks stands before working on the vehicle.
ASSEMBLY 1. Familiaraize yourself with the jack. BEFORE USE 1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with the product and the hazards associated with its improper use. 2. Check and that the pump operates smoothly before putting into service. 3.
OPERATION RAISING THE JACK 1. Block the vehicle’s wheels for lifting stability. Secure the load to prevent inadvertent shifting and movement 2. Position the jack near desired lift point. 3. Set the Parking Brake in the vehicle. 4. Refer to the vehicle manufacturer owner’s manual to locate approved lifting points on the vehicle. Position the jack so that the saddle is centered and will contact the load lifting point firmly.
MAINTENANCE INSTRUCTIONS If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition. Never perform any maintenance on the equipment while it is under a load. Inspection You should inspect the product for damage, wear, broken or missing parts (e.g.: pins) and that all components function before each use.
TROUBLESHOOTING JACK JACK JACK POOR JACK WILL NOT LIFT WILL WILL WILL NOT LIFTING TO FULL CAUSES AND SOLUTIONS LOWER EXTENSION LIFT HOLD LOAD LOAD Release valve is not completely closed (Turn handle clockwise). ...
PARTS LIST Index # Description Part No. Qty. Base Frame TBJ10001 Snap Ring TBJ10002 Wheel TBJ10003 Washer TBJ10004 Saddle Extension TBJ10005 Saddle TBJ10006 Bolt M14X100 TBJ10007 Flat Washer Φ14 TBJ10008 Nut M14 TBJ10009 Swivel Caster TBJ10010 Bolt M8X20 TBJ10011 Lock Washer Φ8 TBJ10012 Bolt M6X90 TBJ10013...
Page 12
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.