Switching To Standby Mode - Miracle-Ear MEENERGY IN Sync User Manual

Switching to standby mode

Via remote control, you can switch your hearing aids to
standby mode. This mutes the hearing aids. When you
leave standby mode, the previously used volume and
hearing program are set.
In standby mode, the hearing aids are not
X
turned off completely. They draw some power.
Therefore we recommend to use standby
mode only for a short period of time.
If you want to leave the standby mode but the
X
remote control is not at hand:
Turn your hearing aids off and on again by
shortly placing them in the charger until one
or more LEDs light up.
To do this, the charger must be powered. Wait
until the hearing aids play the startup melody.
This may take several seconds. Note that the
default volume and hearing program are set.
11