Adjusting The Volume; Changing The Hearing Program; Further Adjustments (Optional) - Miracle-Ear MEENERGY R AX T 5 User Manual

●
If you want to leave standby mode, but the remote
control or app is not at hand: Turn your hearing
aids off and on again (via rocker switch or by shortly
placing them in the charger until one or more
orange LEDs light up). In this case, the default
volume and hearing program are set.

Adjusting the volume

Your hearing aids automatically adjust the volume to
the listening situation.
If you prefer manual volume adjustment, press
X
the upper part of the rocker switch to increase the
volume or press the lower part to decrease the
volume.
Refer to section "Controls" for the setting of your
rocker switch.
An optional signal can indicate the volume change.
Once the maximum or minimum volume has been
reached, you may hear an optional signal tone.
18

Changing the hearing program

Depending on the listening situation, your hearing
aids automatically adjust their sound based on the
environment or surroundings.
Your hearing aids may also have several hearing
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the
program change.
To change the hearing program, press the rocker
X
switch briefly.
Refer to section "Controls" for the setting of the
rocker switch. Refer to section "Hearing programs"
for a list of your hearing programs.
The default volume is applied.

Further adjustments (optional)

You can also use the hearing aid controls to change
other features, for example, the level of the tinnitus
therapy signal.
Refer to section "Controls" for the setting of your
controls.
19