GE Coil Top Owner's Manual page 39

Problem
Self-Cleaning Models
Oven will not self-clean
Oven starts a self-clean
cycle when you wanted
to bake, roast or broil
"Crackling" or
"popping" sound
Excessive smoking
Oven door will
not unlock
CLEAN light is on when
you want to cook
Oven not clean after a
clean cycle
CLEAN light flashes
Possible Causes
The oven temperature is too
high to set a self-clean operation.
Oven controls improperly set.
Oven door is not in the locked
position.
Oven door locked during
cooking.
This is the sound of the metal
heating and cooling during both
the cooking and cleaning
functions.
Excessive soil.
CircuWave fan is on.
Oven too hot.
The oven door was accidentally •Turn the Oven Temperature knob to OFF . Allow the
locked.
Oven controls not properly set.
Oven was heavily soiled.
Oven controls not properly set.
What To Do
• Allow the range to cool to room temperature and
reset the controls.
• Make sure you turn the control knob all the way to the
CLEAN position.
• Make sure you move the door latch handle all the way to
the right.
• Turn the Oven Temperature knob to OFF . Allow the
oven to cool. Never force the door latch handle.
• This is normal.
•Turn the Oven Temperature knob to OFF. Open the
windows to rid the room of smoke. Wait until the
CLEAN light goes off. Wipe up the excess soil and reset
the clean cycle.
•Make sure the fan is off during the self-clean cycle.
•Allow the oven to cool below locking temperature.
oven to cool. Never force the door latch handle.
•See Using the self-cleaning oven section.
•Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
•Move the door latch handle to the right before setting
the Oven Temperature knob to CLEAN .
www.GEAppliances.com
39