Clock And Timer - GE Coil Top Owner's Manual

Using the clock and timer.
Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 11 hours and 59 minutes
or 9 hours and 50 minutes, depending
on your model.
16
(on some models)
To Set the Clock
The clock must be set for the automatic
oven timing functions to work properly.
The time of day cannot be changed during
a timed baking or self-cleaning cycle.
To Set the Timer
Press the TIMER ON/OFF pad.
Press the HOUR and MIN. or SET TIME
+/- pads until the amount of time you
want shows in the display. The timer
will start automatically within a few
seconds of releasing the pad.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by pressing
the HOUR and MIN. or SET TIME +/- pads
until the time you want appears in the
display.
To Cancel the Timer
Press the TIMER ON/OFF pad twice.
End of Cycle Tones
(on some models)
Clear the tones by pressing the pad of the
function you are using.
Press the CLOCK pad twice.
Press the HOUR and MIN. or SET TIME
+/- pads.
Press the CLOCK pad to start.
Press the CLOCK pad if you wish to
return to the clock display. The timer
function will retain the programmed
settings.
If the remaining time is not in the display,
recall the remaining time by pressing the
TIMER ON/OFF pad and then pressing the
HOUR and MIN. or SET TIME +/- pads until
the new time you want shows in the display.