Table of Contents
Advertisement
MAGIS HERCULES PRO
20
20.1
20.2
MODBUS TEMPERATURE AND HUMIDITY SENSOR
20.3
20.4
TEMPERATURE CONTROL (OPTIONAL)
ZONE REMOTE PANEL
CHRONO 7
CRONO 7 WIRELESS
It is an electronic device equipped with a back-lit display to
control and adjust the room's temperature and humidity. Con-
nection to the terminal block is made via two BUS cables and
two power supply cables.
It programs the relative room temperature control.
It can be applied to the wall using the supplied screws and plugs.
The kit is powered at 24 V (directly from the terminal block).
• OPTIONAL
It is a room probe that detects the temperature and humidity
in the room.
Connection to the terminal block is made via two BUS cables
and two power supply cables.
It can be applied to the wall using the supplied screws and plugs.
The kit is powered at 24 V (directly from the terminal block).
• OPTIONAL
It is an On/Off type backlit digital chrono-thermostat with
microprocessor for setting two room temperature levels, one for
the day (comfort temperature) and one for the night (reduced
temperature), it allows setting separate on and off weekly pro-
grams; Displays any error codes.
It is connected to the appliance with only 2 wires, by means of
which it requests air conditioning. Power supply is by means of
2 "AA" type 1.5 V batteries.
• OPTIONAL
It is an On/Off type backlit digital chrono-thermostat with mi-
croprocessor consisting of two receiver and transmitter elements,
it allows to make the same settings as for the CHRONO 7
The receiver is connected to the appliance with only 2 wires, by
means of which it requests air conditioning.
The Chrono-thermostat (transmitter) is powered by 2 "AA" type
1.5 V batteries.
The maximum distance between the transmitter and the receiver
is about 50 metres (depends on the room).
• OPTIONAL
code 3.030863
code 3.030992
code 3.021622
code 3.021624
47
Advertisement
Table of Contents
