Table of Contents
Advertisement
16
ELECTRONIC MANAGEMENT FUNCTIONS MAGIS HERCULES PRO
The electronics of MAGIS HERCULES PRO is characterised by
an integrated intelligent management system that establishes the
system operating priority, on the basis of the external climatic
conditions and central heating system flow temperature set.
It is characterised by a user interface made up of a control panel
with a large backlit display, controls consisting of lit touch keys
with sound effect and encoders for making adjustments.
It allows activating the electric resistances for both the heating
system (optional) and for the DHW (power supply to be taken
separately); the logic plans to activate the resistances if I do not
reach the temperature set within the max. time (set a max. time
for the system and a separate for the DHW), or below a certain
outdoor temperature (also settable) I can immediately activate
the electric resistance.
The "DHW (Domestic hot water) BOOST" function is also
available, by activating this function via the parameter menu,
the DHW (Domestic hot water) operation takes place with the
contribution of both the heat pump and the electrical resistance,
with a logic that minimises storage tank charging time.
MAGIS HERCULES PRO works at a variable temperature,
using the external probe present on the condensing unit (located
outside); it is set up to directly manage 3 zones (one direct and
two mixed) for operation in both central heating and cooling
mode, with the possibility of setting 3 climatic curves in central
heating and 3 climatic curves in cooling (for the 3 zones) without
having to provide for additional electronic supervision boards.
In this case MAGIS HERCULES PRO can be connected to
remote zone panels (code 3.030863) via Bus connections (up
to 3 can be provided), or it can be connected with simple on/off
contacts (e.g. CHRONO 7) to control the room temperature
of the 3 zones.
3 humidistats (code 3.023302) can be connected to control
humidity or 3 Modbus temperature and humidity sensors (code
3.030992) to fully manage the related dehumidifiers.
24
MAGIS HERCULES PRO
For each zone, from the MAGIS HERCULES PRO electronics
it is possible to set if the zone is only hot, hot/cold, only cold
(dehumidification included, with dew point calculation), as
well as setting the programming of different time slots for all
three zones.
The appliance can be managed remotely only by installing the
DOMINUS interface board kit (optional), which consists of a
simple and intuitive application (App) that makes it possible to
control the system and view its operation via Tablet, Smartphone
and PC.
There is an input for system activation in correspondence of elec-
tricity production by the photovoltaic system (if installed). This
input (when active) forces the central heating of the storage tank
for the production of DHW at maximum storage temperature.
There is a 230 V output to control summer/winter diverter valves
in heating systems with fan coil cold/radiant panels; switching
occurs with the change of mode (summer/winter) from the
control panel or from the zone remote panel.
The MAGIS HERCULES PRO electronics also manages the
anti-legionella function, which can only be activated if the system
is provided with an auxiliary generator (electric resistance present
as a standard, but needs to be activated).
The electronics of MAGIS HERCULES PRO also controls the
activation of the recirculation circulator (optional).
Whereas, to control a possible solar system, a solar control unit
is required (to be purchased separately with special optional Kit).
The integrated electronics also manage the screed heating func-
tion in order to perform the initial central heating cycle on new
radiant panel systems.
Advertisement
Table of Contents
