Download Print this page

TP-Link Kasa Smart Quick Start Manual

Light strip, multicolor

Hide thumbs Also See for Kasa Smart:

Download this manual

Quick Start Guide

Kasa Smart Light Strip,

Multicolor

*Images may differ from actual products.

Set Up Your Light Strip

DOWNLOAD APP

STEP 1

Get the Kasa Smart app from the App Store or Google Play.

CONNECT HARDWARE

STEP 2

Connect all the parts. When connecting the light strip to the

controller, make sure the arrows point at each other.

SET UP

STEP 3

Tap the

button in the app, tap Device > Smart Lights, and

select your model. Follow the instructions in the Kasa Smart

app to complete the setup.

Button Explanations

Control Button

• Press once to turn on / off your light strip

• Press twice to switch preset lighting effects

• Press and hold for 5s, then release to reset only Wi-Fi settings

• Press and hold for 10s to restore factory settings

Installation Tips

To avoid damaging your light strip, note the following tips.

1. Only cut the exceeded length along the cutting lines of

the light strip after unplugging the light strip.

2. Avoid any sharp corners or turns behind the LED beads.

≥90°

LED

Page 1 To avoid damaging your light strip, note the following tips. STEP 1 STEP 3 Get the Kasa Smart app from the App Store or Google Play. Tap the button in the app, tap Device > Smart Lights, and 1. Only cut the exceeded length along the cutting lines of select your model.
Page 2 • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended. For technical support, the user guide and other information, • Adapter shall be installed near the equipment and shall be easily please visit https://www.tp-link.com/support/. accessible.